Marc Wiese wrote:
> Can anyone tell me which one is the 93 up and 13B Cosmo
rotor housing?
Do me a favor all you 93 up and Cosmo folks and please measure this
distance for me. This is a double check.
Paul Lamar
Uhh, Paul, only the center one lackes the exhaust port insert for a
turbo.
[Marc Wiese]
That is true. It lacks an insert period. Did you know Mazda only makes one
rotor
housing casting for all years 86 and up replacement uses? It happens to be
the
one on the left. You can tell the 93 and up rotor housing by the knock
sensor boss above
the trailing spark plug. I think they just change exhaust inserts.
Paul Lamar
Paul, the other way you can tell the tubo housing is that it has a coolant
port right above the smaller stud which must be plugged if using it with
other than the stock turbo manifold. The NA do not have the port open.
Ed Anderson
I am glad you reminded me about that. That pipe just above the heat shields
is the turbo water cooling supply line. The new manifold has enough
meat in the flange to drill and tap it to supply water to the turbo.
Provided you have a water cooled turbo of course. Otherwise the flange will
block that off if used with turbo rotor housings.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org