Snip
Paul, the other way you can tell the tubo housing is that it has a coolant
port right above the smaller stud which must be plugged if using it with
other than the stock turbo manifold. The NA do not have the port open.
Ed Anderson
I am glad you reminded me about that. That pipe just above the heat shields
is the turbo water cooling supply line. The new manifold has enough
meat in the flange to drill and tap it to supply water to the turbo.
Provided you have a water cooled turbo of course. Otherwise the flange will
block that off if used with turbo rotor housings.
Paul Lamar
As a point of interest the 13B Cosmo rotor housings do not have the coolent
port open. The coolent for the turbos is picked up from the waterpump housing. A
separate thermostat is even used for turbo coolent.
Kelly Troyer
Wow. Sounds like a high buck engine.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org