The O-ring failure was an anomaly. We now have a handle on the correct size
to use. Bad idea to save a few bucks and not use teflon encapsulated O-rings.
One coolant leak and an engine overheat can destroy the stock coolant O-rings.
Besides that the TES oil o-rings are cheaper than the stock Mazda oil O-rings.
Sorry, but I'm not comfortable with "teflon encapsulated". For one thing I get the
idea they may not seal as well (stiffer?). Let someone else be the guinea pig and
accumulate long trouble free hours.
I like "cheaper" but need some convincing that they're better and won't cause
damage.
Any answers to my other questions - especially how the tension bolt failure could
relate to air-in-coolant?
Finn
Lots of people have run them in racing for years. In fact Lynn Hanover uses
teflon coated wire no less. How stiff is wire? :-)> Surely the silicone rubber core
is softer than wire? Ed Anderson swears by them in
his engine. Perry Mick is running them in his engine no problem.
Your tension bolt failure relates to air in cooling as in the pressure
in the combustion chamber is leaking past the O-rings into the water jacket.
The end housings are deflecting slightly away from the rotor housings.
One of the things about the teflon O-rings is they will take a little leak
of combustion gases without melting so readily.
Paul Lamar
Ok, how about the dowel o-rings?
This is all I've saved:
-----------------------------------
The proper sizes are:
0.093" section 4.68 inch ID
0.118" section 4.33 inch ID
I can vouch for the quality of the Creavey O-rings but some
of those water TES o-rings from Mcmaster Carr I have seen
are not as good.
1. Inner coolant oring
part # = 9319K239
asa568a-175
qty = 4, price = $9.94 each
2. Outer oil control oring
part # = 9319K221
asa568a-158
qty = 4, price = $7.17 each
----------------------------------------
Do you have a complete summary of SKU#s, prices and source for:
Water jacket o-rings
Oil scraper o-rings (don't know that I need these)
Dowel o-rings.
What is a SKU#s ? Source is Creavey.com. See the ACRE NL web site for the link.
Call them and get them to give you a quote. Dave Lemon of Mazdatrix was going to carry
the oil O rings. I am going down there today to check out the 93 up
and our manifold. I'll bug him again.
Of course, if you have a complete set you could priority mail me, I could pay you at
Sun-n-Fun :)
Still need a source for tension bolt(s) and thrust bearing, although I could take those
from the engine in my garage. I like the idea of testing the tension bolts. Will try
this.
Or should I put it together as-is so I can fly it to Sun-n-Fun and do the overhaul after
that?
Finn
I am not doing this to make money Finn. I spend money advertising this newsletter.
Something I like to do because I think the rotary will make a fine aircraft engine.
You must buy stuff from other people. I hate the dog work of running a business.
Shipping, receiving, accounts receivable, etc., etc., etc..
Bug Tracy, Mazdatrix or Bruce Turrentine to carry these O-rings. They are a major
advance in the durability of the Mazda rotary.
BTW new tension bolts are $17 each. $300 for the set. There are a zillion
used ones out there. You could make lots of money by setting up your scope and
inspecting used tension bolts for cracks. I'll give you plenty of free
advert plugs on this news letter if you do a good job. I know Mazdatrix
has hundreds if not thousands in a pile. I'll ask Dave if he is interested in
having them inspected.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org