Hi,
        I will be using a submerged inlet for charge air and cooling

for

the 13B in an EZ pusher.  Has anyone computed the size of the scoop

or

inlet based on air consumption of the system? For example how much
charge air is needed by the 13b 400cfm, 500cfm?  How much air is

needed

for cooling? Rad volume of 500cubic inches to 700 cubic inches?

Frontal

area of the radiator?  It seems that builders start with the scoop
suggested by the designer, however, how many designers suggest using

a

13B?  Thanks for any help.

Joe Berki
Limo EZ

Assuming a 50 F increase in air temp across the radiator, you need 2700 cfm
for each 100 hp.

I expect to achieve roughly this delta T on a 90 F day and air velocity
through a 2.5" thick core of about 35 mph.  We'll see.

Al Gietzen

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org