Subject: Wood Prop for sale.
From: ACRE NL
Date: 3/25/2002, 7:08 PM


Hi Paul

I have a 2 blade, wood, 68 x 74, Aymar Demuth prop for Sale. It's made
for a
RV6 with a 13B, 2.17 -1 drive , approx. 100 hrs. C/W fibre glass 13"
spinner, front & rear plate. Anybody interested contact me of list at
jmosur
@ interlog. com

Regards
Jim Mosur


Could this prop be modified to work on a pusher?
Wendell

A pusher Mazda would need a 2.85:1 gear box as it will rotate the opposite
way than Jim's 2.17:1 gear box.

BTW if your engine is not revving as high as you would like you can try 
cutting an inch or so off the diameter. The tips are 80% to 90%
of the total prop drag when the engine is running at max RPM. You will 
get a bit more RPM and HP that way without going to a lower pitch prop.
You might lose a bit of takeoff thrust but most home builts don't need
as much takeoff thrust as they have. I am thinking this might work for
Chuck Dunlap.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org