Subject: Ipac GPS connector?
From: ACRE NL
Date: 3/26/2002, 11:54 PM


The nice thing about RS232 connections is that you can mess up the
wiring
and you won't hurt anything. I need to wire up a gender mender in
order
to
get my GPS to work with the IPAQ. There are gender menders out there
but
they won't work because they don't cross over the TXD and RXD
cables.
If
you can find one that comes apart you might buy the tool the pushes
the
pins
out so that you can move them on one of the DB9 connectors.

Hopefully this will get you started.


Where does one find that peculiar (DIN?) connector on the bottom of the
IPAQ? I haven't found one yet that I can purchase somewhere. I use the
controlvision version gps on the ipaq and want to try a few things. BTW,
I hear there are 2 versions of the connector depending on the version of
IPAQ you own (I have a 3650 and use a Garmin gps antenna/receiver
prewired to the ipaq).
[Marc Wiese]

I *think* it's the Hirose Electric (HRS) EMI connector type 3130-12P-C on page
245 of Newark's catalog 119 (2001-2).

However, when I tried to order it some months ago (last year?) they did not
have them in stock and I would have had to buy 50 (or was it 500?) for Newark
to get them for me.

If you do find a source, please let me know. I don't want to pay $30 for a
cable I can make myself (provided I can get the connector).

Finn

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org