Stan Blanton wrote:

What specific parts are different between the 20B and 13B?
I know the e-shaft but what else ( eg. tension bolts, intermediate

housings)?

Are all of the parts specific to a 20B available new from Mazdatrix or

some other supplier?

Stan Blanton

I'm no expert but I know the tension bolts and intermediate housings are

different.

There may be some others. Bruce Turrentine has built several three rotors

out

of two rotor parts. Tracy may know as his three rotor was built that
way by Bruce. Bruce does not respond to my email for some strange reason.
If you have a connection with Mazda factory racing one can buy three rotor

parts.

Paul Lamar

Paul,
Bruce got straight back to me on the video BruceTurrentine@aol.com
You  must have done something to upset him !
George (down under)

I cannot imagine what it would be. I have given him hundreds of free
advert plugs on here. Maybe I need to start bad mouthing him to get his
attention :-)>

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org