Paul,
Bruce got straight back to me on the video BruceTurrentine@aol.com
You  must have done something to upset him !
George (down under)

I cannot imagine what it would be. I have given him hundreds of free
advert plugs on here. Maybe I need to start bad mouthing him to get his
attention :-)>

Paul Lamar

Oh boy - I don't think that will work!!
Perhaps you ask those technical questions, which he doesn't have time to
answer.

I was going to tell him you have trouble contacting him, but thought I'd
err on the side of caution - getting very diplomatic in my old age !

BTW he has a CD of the Video, you can run it on your PC -and I have
a new one (everything that opens and closes), so that should be fine.
I will let you know how it looks.

Also how much room do I need from thrust line to all motor accessories
for the 13B.
George (down under)

Good question on that one. I cut my water pump down and moved the
alternator to the side of the engine. That made the engine from thrust
line to the cowl about 8.5 inches with the manifold on top of the engine.
No manifold on top about 5.5 inches. New engines don't have distributors of
course.

Also you can scale things from these old drawings.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org