Jerry Hey wrote:

Paul, the drawing portrays the MM plate narrowed to 20".   Do  you see
any problems?    If this is OK then we can offer the plate at any width
from your original down to this size.  Also, there is no problem for me
to hang the starter at 180º if someone wanted it there.     Jerry

Looks OK to me.
I think the starter mounting bolts interferes with the long 10 mm plate mounting
bolts at 180 degrees but double check me on that. Here is a pic when 
I tried it way back. When you get the plate done just rotate it around so the starter
is 180 to check. One or more long 10 mm bolts and spacers might still work to hold 
it in place temporarily for a check. You do have a starter I hope.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org