Wendell Voto wrote:
I am attempting to use the sandwich plate method of mounting the engine to the engine mount. Do I need to add a plate to extend the tube to compensate for the 1/2 inch plate I am using to facilitate the Barry mounts, or just add more oil to the pan to bring up the oil level? More oil will add more weight than a plate or is it necessary to do either? Is there a lighter pick-up assembly, mine weighs 11oz.?
Wendell
Half inch plate Wendell? That will be real heavy indeed. A foot square 1/2 inch
plate is 72 cubic inches at .1 pound per cubic inch that is a 7 pound plate.
Not counting any holes.
Most use a 1/4 inch plate and double up just where the Barry mounts go. If the
mounts are right adjacent to the engine 3/16th will work fine.
Oil weighs less than about 1.25 pound per quart. A little more oil won't hurt.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org