Subject: Cooling system ideas & turbo manifolds
From: ACRE NL
Date: 4/18/2002, 3:00 PM


Oh I see you bought one of the Lincoln 175 good deals at the show. Great welder.
I'll see what I can dig up. Here is one from Marc ?.
Also one from Jerry Hey.


Great, thanks! Yes, the 175 is such a deal. We took the position "show us we can weld aluminum" and they sure did. The helmet was already here when we got home and a message on the answering machine asking when they could deliver the machine. No tax, no shipping. Still not believing it was really that good of a machine I dragged out some scraps of aluminum extrusion from the barn.. old nasty stuff, it welded just like the blanks of pure aluminum they use at the show. I'm a believer. For the price of an engine mount and a few odds and ends you need for a composite plane, you can buy a great TIG welder, do it yourself and if you can part with it, sell it when you're done... that is highly unlikely.
My next question though is given we have this tool, why should we not make the intake manifold ourselves? The casting is great but with that aluminum pipe you could make a very lightweight manifold.
...Chrissi

Give it a try. I found it difficult to form the oval, bend the tube and still get
the flange bolts and turbo in there. Perhaps your HKS TO4 turbo manifold gives more room than the
stock turbo manifold. I screwed with it for about six months or a year and never
came up with a good looking part. You will also have an advantage as you will
have more room over the engine than your typical tractor installation. I had to get those
pipes right down on the top of the rotor housings. Mazdatrix still has some flanges
I think.

Not to mention tube bends are a greater radius than pipe bends and twice the price.

BTW Tom, I got the patterns and core boxes. Looks great.
 
Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

stock-4port-lower-install.jpg

TURBOMA3.GIF