The idea of a fan makes a lot of sense. Why use a radiator and intake
hole-duct large enough to cool on the ground and initial climb
out when you can use an electric fan and turn it off for high speed
cruise where the dynamic pressure available to force
air through the rad is four times higher?
Glad you are finally seeing the light. That was my
recommendation about a year ago. I still like the idea. The fan
adds 2.75 inches depth to the rad. Don't know if this is acceptable
with
the rad under the engine placement but I will soon find out. Jerry
As I recall Jerry I never really trashed the idea :-). You got any
messages
to prove otherwise? :-) It will fit.
BTW Got anything worth while to show me to fly
the 182 up? I need to do that once a week to keep it from rusting.
Florida was way too far :-)
Paul Lamar
Paul, I will have something that you will like shortly. The MM plate
project has been delayed because a computer problem that should be
resolved tomorrow. I'll let you know as soon as we have something
real. Very good idea to go racing. If I can build any parts for the
racer (you know my limitations) I will be pleased to do so. No charge
of course. Jerry
Thanks Jerry. Donations and labor can substitute for money.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org