Subject: Very successful Liquid cooling system
From: ACRE NL
Date: 4/18/2002, 11:03 PM


I guess you missed the Engineair tent. It was over by the small food stands.


Actually we spent the bulk of our time 10 ft from there in the Aerocad  area.
I had misread your description that lead me to believe there was a fan on
each side of the radiators (push/pull arrangement). They kept running the
engines for a few minutes at a time it was both annoying and a violation of
the exhibit area they were in, furthermore the props would spin slowly which
gave the impression that one wrong move and there would be a bloody mess all
over us... so we were not remotely impressed. If they wanted to run their
engines they needed to get their noses out of the air and over to the auto
egine area.  ...end of rant.
...Chrissi

Cozy Mk-IV 13B-turbo
 www.CozyGirrrl.com

The funny thing was the prop was driven by a small electric motor and not
the V8.

The real shocker was their sledge hammer approach to mitigating
the V8 torque pulses going into the prop gear box. You are looking at a 30 
pound flywheel here. An ounce rubber is worth a 30 pound flywheel.

BTW Tracy tells me he keeps going down on the durometer of the
four small rubber bushings in his torque isolator and it
keeps working better and better.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

EngAir-flywheel.jpg