Subject: unlucky weather oil consumption
From: ACRE NL
Date: 4/18/2002, 5:04 AM

G Bankston wrote:

Hello,

Just back from Sun and Fun and I missed everything rotary!!!
Everybody was gone by the time I got there.  Saw Chrissy and her friend,
and saw Dave Adkins seminar.

Very unlucky for me...sorry people did not stay till thursday.  Live and
learn.

Glen
N12LZ
Moultrie, GA

Many people fly in to Sun & Fun and OSH by light aircraft. There is a dictum
that says if the weather might get bad it will and if the weather is fly able
now.... fly. So as the air show progresses and it looks like the weather will
get bad almost everybody leaves after a few days. We started to ourselves
but my wife Robin wanted to stay so Steve and I left Wed night and towed the 
Garber DG1 back to Leesburg Fl on Thursday morning and flew the 182 to Zephyr 
Hills to pick up Robin on Friday. We then flew up to Tracy's. The weather looked
bad North of there so we took Laura's advice, stayed overnight and flew the next 
morning at 9 AM with more or less a scud run to Charlie and Tuppers England's 
house & air strip near Jackson Miss.

Thanks to all the folks that put us up and put up with us. Same story next day 
as we made a scud run through the Dallas area and arrived in Midland Texas just 
before a T storm hit with predicted large hail. We put the 182 in a hangar 
over night and had a nice run into Thacher AZ next day with 30 MPH head winds all
the way. It was either fly up at 10K + or put up with the bumps under the
clouds. I prefer 120 MPH flat out at 10K to the bumps. Called Chuck Dunlap 
and he picked us up and took us into town for lunch. Thanks Chuck.

Chuck kindly gave us a tour of Cable 1 and his hangar. Chuck is burning about one
quart of oil per hour which indicates the rubber oil seals on the sides of
the rotors are melted. No smoke is noticeable when starting the rotary
up (the normal car test for melted oil O-rings) but come to think of it the 
prop could be blowing it away before it is visible. 

Try removing the prop and start it up Chuck. If you get smoke it is the
O-rings for sure. Chuck has a set of teflon encapsulated silicone O-rings 
he intends to try when he gets time.

It is common to damage the stock oil O-rings if you let the oil get over
210 degrees F or so. The TES O-rings are good to 500 F. Overheating the oil
is common unless you are lucky enough or smart enough to copy oil cooler ducting
that is known to work. :-) You need to get the oil cooler air ducting and cowl 
pressure right the first time. Please ask questions and send pictures of 
your ducting and cowl air outlets before you fly your airplane to avoid 
this scenario.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org