Rick Girard wrote:

 There's a much better way to remove broken bolts than EZ Outs.  Many of
 the better auto parts places and most industrial supply houses have left
 hand twist drill bits.  If they don't begin turning the broken piece out
 when the drill bit bites, they will at least not continue to drive it

 > into the hole.

  To remove a broken tension bolt I installed  a left hand drill in
the end of a shaft to run through the housings and it worked great.
  Ken Welter

So that is number three. Take those bolts out folks, one at a time and coat
them with RTV.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org