Subject: Evaporator cores
From: ACRE NL
Date: 4/20/2002, 4:57 AM


Joseph Berki wrote:
 >
 > Hi,
 >         Does anyone have a source for A/C evaporators for use as a
radiator?  I
 > have searched the web and found that everything is keyed to make and
model
 > of the auto it goes in.  That does not help with dimensions and cubic
 > inches.  If you take one from a salvage yard to determine size then
order
a
 > new one from a supplier, seems like there should be an easier way. I know
 > the salvage yards could probably come up with several but  how does one
 > test the integrity of a component that has questionable history.  Like
mom
 > use to say "Don't put that in your airplane, you don't know where it's
 > been".  Thanks for any help.
 >
 > Joe Berki
 > Limo EZ
 > Working out details for exhaust augmented cooling


Years back when I had no money at all, I used cores from full sized GM cars
for oil coolers. I added one from the core pile to a Lola to aid in water
cooling. Cores that will leak freon often will not leak water. They were sold
by the pound. Or about $4.00 each. Cores that leak freon will also leak oil,
just for the record.
Lynn E. Hanover


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org