Paul Lamar:
Too soon to say. We will be doing 20 the first batch. How many want

just castings?

Not me.

BTW there will be enough metal over the rotor >>>housing water ports

plumbing for those that want to >>>run a water cooled turbocharger. This
will fit the late >>>13B (93 and later) with special order machining.

Will it fit the 13b-RE late model Cosmo with big ports too?  I bought one
cheap through:
http://www.fc3s.org/

Thanks,
Ernesto Sanchez
rotary canard
http://home1.gte.net/res0391z/index.html

Yes. Different machining is required so the cost will be higher.
Also some hand porting with a die grinder will be required.
Too expensive to do a separate pattern for the several late
13Bs out there. We will do another pattern if necessary when 
the RX8 engines are common.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org