2) Use an ELECTRICAL approach. Again, place the "generator coil" in the
spinner. This coil would cut across electromagnetic fields generated
by
an "electromagnet coil" mounted to the stationary engine/PSRU. The
stationary electromagnet can be electrically powered to introduce
variable amounts of current in the spinner coil, even reversing
polarity
to drive it in opposite directions. Pros: Can be entirely an
electrical
solution, mininal moving parts. Cons: Draws upon aircraft electrical
sources.
It is not that simple. If you put a coil on the spinner it will pick up the
magnetic field from the permanent magnet or electromagnet mounted outside.
However, the induced voltage will be always AC. The direction of current
driving the motor will be defined by the direction of diodes in the
rectifier (mounted in the spinner) and it will not depend on flipping of the
magnetic field of the outside magnet or electromagnet. Flipping the
external magnets would change the phase of the AC only.
If you want to reverse the voltage driving the motor in the spinner, you
would have to use synchronous rectifier made of transistors. The system
would have a bunch of permanenet magnets to deliver power, and a small
electromagnet that would "tell" the synchronous rectifier which way to
rectify, positive or negative.
A little more complicated but doable.
Jerzy
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org