Subject: Jim West fatal Coot crash.
From: ACRE NL
Date: 4/24/2002, 8:31 AM


Ken Welter wrote:

  Yes and as you remember I told you at Arlington last year that
Jim
was a accident waiting for a place to happen as the engine
installation was a compleat abortion and in addition to that he
had a
aft CG problem and he would not listen to me about it and I told
him
that it would be prone to stalling and spinning in the event of
a
engine failure, then a couple months ago on a taxi test when he
lifted the nose wheel off the ground the nose came up and with
full
stick forward he could not get the nose down and it stalled at
about
ten feet off the ground braking the nose gear and one main gear
and
damaging the hull. He repaired the damage but I do not know if
he did
anything about the weight and balance but you would think he
would of
at that point.
  Ken Welter

Its always particularly sad to learn of an accident that likely
could have
been prevented.  You can fool yourself and perhaps others, but you
can not
fool the laws of physics and aerodynamics - at least, not for long.
I did
not know Jim, but my condolences go out  to his family and those who
did
know him.

Ed Anderson

What doesn't make sense here is how he got an airworthiness cert if his
W&B was
off. FAA (and presumably DARs) are pretty strict about W&B calcs; at
least my
FAA inspector was.

Finn

Yes but do they actually check it or do they check just the paper work?
There is a saying in the professional A&P world. "I pencil whipped it."
Meaning I signed it off without actually doing the work. In my experience
the FAA rarely checks anything other than the paper work.

Paul Lamar

Just wait until you have a ramp ck.

Joe

Oh oh! I think I just pissed off the FAA. I am sure they will now come out
to my airport (unamed on purpose) and wait until I bring it out of the hangar :-)
I'll make sure I have all my paper work in order :-)

Paul Lamar


I believe the FAA and the DOT inspectors are generally doing a decent
job.  It is the homebuilders that are sometimes irresponsible.  I
believe that the responsibility lies on the sholders of the
builder/flyer - the proof is clear, his life is at stake.  I don't know
what else we can do to improve that, EAA has technical advisors, good
builder/pilots tell when they see a dangerous situation.  One thing is
sure We all pay for the stupid accidents.  We get higher insurance
premiums and/or cannot get insurance at all. And the public image of the
homebuild community suffers.
There has to be a better way!!!

Rino

Some one once told me; "Aviation is like a self cleaning oven."
Another saying is; "There are old pilots and there are bold pilots."

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org