> > > > > Ken Welter wrote:
Yes and as you remember I told you at Arlington last year
that
Jim
was a accident waiting for a place to happen as the engine
installation was a compleat abortion and in addition to that
he
had a
aft CG problem and he would not listen to me about it and I
told him
that it would be prone to stalling and spinning in the event
of a engine failure,
What doesn't make sense here is how he got
an airworthiness cert if his W&B was
off. FAA (and presumably DARs) are pretty strict about W&B calcs; at
least my
FAA inspector was.
Finn
Yes but do they actually check it or do they check just the paper work?
There is a saying in the professional A&P world. "I pencil whipped it."
Meaning I signed it off without actually doing the work. In my
experience
the FAA rarely checks anything other than the paper work.
Paul Lamar
I have never hear of the FAA or a DAR actually checking the W &B as that
would mean hauling out the scales, etc. Mine did check the paper work and
my calculations of W &B. But, given it was a well know RV-6A design -
probably did not spend any time worrying about it. Has anyone ever heard
of
them actually checking the W & B on an experimental?
Ed Anderson
Wrathall Mark wrote:
Here in the Austria the inspector from the authorities did require a
re-weighing of my friends KR-2s in his presence, but he is going to be the test
pilot. The test pilot here must have either an aerobatic rating or have
attended a basic test pilots training. They also require prograssive
inspections during build, rather than just a single inspection at
certification time.
Mark
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org