SUPER SNIP . . .
I could test grind. It would be nice to test on a stand, any
suggestions on
how I could load an engine on a stand without the expense of a PSRU
?
Use a homemade dyno. Hook the engine up to an auto trans, lock the
output shaft,
cool, cool, cool, the oil. You have an oil filled waterbrake.
Royce
Another great idea Royce. Use a hydraulic cylinder and a pressure gage
to measure the torque. When you know the torque and the RPM you know
the HP. HP = Torque (ft lbs) X RPM / 5252 as I recall.
You can control the stall speed of the torque converter doing all
the HP absorption by controlling how much fluid it has in it.
You will need a really big rad with a really big fan to cool the
oil.
Paul Lamar
I was having a hard time seeing this the way it should be done. So I went
to the archives. Wouldn't you know, Paul already has it sketched. I see it
perfectly now.
Rick Bunnell
cvp@iowatelecom.net
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org