Subject: build the test stand?
From: ACRE NL
Date: 4/29/2002, 5:17 AM

snips....

No need Perry. We are building a test stand down here as I want
to make it a dyno too. Mufflers, intake manifolds, etc., etc.. We will
use your blades as a prop load for the dyno.

IMHO Tracy is really too busy to spend a lot of time running his
test stand.

Paul Lamar


Well, that's even better.  I can be at your place in 6 hours non-stop
in my EZ.

--
Perry Mick
Duckt N7XR
http://www.ductedfan.com

I can pick you up in Camarillo as SZP is a bit short. 7000 feet over
there.
What size are your tanks. Gallons per hour?

Paul Lamar

Paul, are you depending on me to build the test stand?  When is it
needed?  I am overloaded at present with the motor mount and peripheral
ports.  I am afraid I might not be able to get it done by the time you
need it.   I could ask Danny for an estimate.  His shop is not  busy at
this time.  He would do a first class professional job  Since we all are
going to benefit from what is learned from the dyno, I think many of us
would be willing to help pay for it.  I know I would.    You are welcome
to run it  up here, where the "neighbors" are unlikely to complain.
Jerry


Test Stand:
You can if you want Jerry. They don't cost much in terms of material.
Steve Kozloff my hangar neighbor will probably build it. As soon
as he finishes that full size antique replica locomotive he is working
on. I may want to make some engineering changes and Steve is close by.
He has a mig welder which is quicker than my tig. He also has 
about 40 feet of left over electric welded square steel tubing that 
we can use. If Steve cannot work on it for some reason I will learn to 
MIG when I get back from OZ and work on it myself. 

You yourself would probably get one done before Steve and I could get to it.
Handy thing to have. Hopefully I will be on-line from down in OZ 
with my new lap top computer so if you have any questions about it 
after I leave in two weeks or so, I can answer them from down there.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org