Subject: Cozy late 13B HKs Man. TO4
From: ACRE NL
Date: 4/30/2002, 6:15 AM


Ernesto brought over his HKS manifold and TO4 turbo today
and we tried it on the Kis. Looks like it is going to work.

Minor change in upper tube mount on the firewall to gain
a bit more clearance. It looks like the mounting point
on the firewall needs to go out two inches and perhaps down
two inches.

I'll be working on some drawings for his Cozy installation.
That HKS manifold is a bit big but it is not all that heavy
at around 12 pounds. Nice piece of work. The waste gate however
is five pounds alone. Another nail in the waste gate coffin.
Paul Lamar


What is the model of the T04 he has? What are the trims of the turbine and compressor?That may be an HKS manifold but not their latest version. Our wastegate flange is an inch or two further back (towards the prop) and angled down about 30 deg.
Many of the aftermarket turbo companies sell wastegates, I am sure some of these are much lighter in weight.
...Chrissi
Cozy Mk-IV 13B-turbo
www.CozyGirrrl.com


What model do you have Ernesto?

Angled down is not good. That lowers the turbo
and complicates the oil drain back. Speaking of oil drain back I see
now why we are having problems. The Garret or Turbonetics oil drain
back fitting is too small and the specified restricator jet/hole may be too
large for the rotaries 90 psi. It is sized for a 30 psi oil system.
Here are some picturs of the Garret 1/2 inch fitting compared to
the Mazda 3/4 inch drain back pipe. the Mzda is over twice the
drain back area.



Only the wastegate is angled down
...Chrissi
Cozy Mk-IV 13B-turbo
www.CozyGirrrl.com

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org