Ernesto brought over his HKS manifold and TO4 turbo today
and we tried it on the Kis. Looks like it is going to work.
Minor change in upper tube mount on the firewall to gain
a bit more clearance. It looks like the mounting point
on the firewall needs to go out two inches and perhaps down
two inches.
I'll be working on some drawings for his Cozy installation.
That HKS manifold is a bit big but it is not all that heavy
at around 12 pounds. Nice piece of work. The waste gate however
is five pounds alone. Another nail in the waste gate coffin.
Paul Lamar
What is the model of the T04 he has? What are the trims of the turbine and
compressor?That may be an HKS manifold but not their latest version. Our
wastegate flange is an inch or two further back (towards the prop) and angled
down about 30 deg.
Many of the aftermarket turbo companies sell wastegates, I am sure some of
these are much lighter in weight.
...Chrissi
Cozy Mk-IV 13B-turbo
www.CozyGirrrl.com
What model do you have Ernesto?
Angled down is not good. That lowers the turbo
Seh said *wastegate flange* anlged down 30 degrees.
Right. Big difference. Sorry. Other than that Chrissi, does it look
the same?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org