Very nice work indeed. I think the head count will be influenced by not
only cost but the availability of blades. In the past its been suggested
that for the end product the user would have to fabricate his own blades.
I've done a fair amount of composite work in the past. But I dont think I'd
be comfortable flying prop blades I made myself. So if the prop is
available complete with blades count me in.

Mike Wills

Mike:

After the test blades are fully tested on Paul's rig, I will be able
to produce and sell the blades.  Absolutely no idea of cost yet.
There will not be just one blade, there will have to be variations.
An opposite twist version for opposite rotation.  The shank will
have to be indexed differently for pushers.  That makes four
different blades right there.  Then there may be other variations,
some may want smaller or larger diameters.  Some may want
narrower blade chord if they have less HP, etc.  Bill Freeman
designed it for a particular HP, I'll have to look it up, think it
was 200 or 250 HP.

--
Perry Mick

Perry
Didn't you have a web page about prop construction?
We went to your web site, but didn't find a liink.
Royce

Royce:

There are some websites out there about building your own prop.
The one's I'm familiar with are wood + composite construction, like
Al Wick's.  Don't have the URL handy but I can find it for you if
you want it.  I've don't think I've ever had anything on my site about
actual construction details, I do talk about the general characteristics
of my fans.

--
Perry Mick
Duckt N7XR
http://www.ductedfan.com

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org