Now, here's a problem for one of the engineers
on
the ACRE list: If a .165 restrictor is okay
for the typical 60-70 psi
aircraft oil system, how much smaller an
orifice would supply similar
volume
and pressure for a 20b's 90 psi? Any help
would be
appreciated--including
how to go about reducing the diameter of the
restrictor orifice (braze
and
re-drill?).
<Tom Parkes
*********************************************************
Hi Tom; ..............Not a problem at all!!
The only factor you need to get me is how much oil
volume you are presently flowing out of the .165 orifice
at 60-70 psi. Then I will calculate what new size
orifice you'll require to flow the same volume (Gpm) at
90 psi.
Butch
I've seen turbos that smoke and leak oil like crazy no matter what, put
together wrong at the turbo shop, so that is a possiblility too.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org