Subject: Dry pan/support for sale.
From: ACRE NL
Date: 5/2/2002, 4:56 AM


Paul wrote:
Very elegant solution to motor mount brackets
Frank.
That is the trouble with those NC mills. They
are expensive and
they MUST be paid for.

Paul Lamar

Mark Wrathall wrote:
Paul, I am suprised you never added CNC to that Bridgeport of yours. There
is an outstanding Linux machine control program (EMC Linuxcnc.org) which
runs standard G-code and controls either a stepper driver through the
parallel port or servos though the servo-to-go card. I bought an excellent
light duty stepper controller from a guy in Germany to learn this stuff
(NC-Step.de) , but with your electronics experience, I'm sure you could
easily cook up your own, or replace the power amp stages with something
powerful enough to drive big steppers on the bridgeport.

I am still on this CNC learning curve, but if you want any pointers to info
or sources I have been trolling the internet quite intensively on this.

Mark

I don't have a Bridgeport. I wish I did. My hangar neighbor has one
however. I have a cheap Chinese mill. I don't really want to go into
business. I could, I guess, finance a NC mill and start making parts.
It is the rest of the business I don't like :-)

I have been following those developments sort of. What worries me
is the lead screws among other things in the Chinese mills would probably 
have to be changed as they are not up to real mill standards.

I took a two semester course a few years ago in NC machine tool programming.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org