"Richard M. Martin" wrote:

Does anyone have a drawing for an aluminum fuel injector bung that when

made

can be welded to an aluminum manifold tube?

Richard

 Richard, made certain you check the dimensions on any injector bungs. Those
that are designed for the most common "American" make of fuel injector won't
match with the stock Mazda injectors.  The nozzles on the Mazda injectors
are smaller in diameter and there are other dimensional differences. The
more common "American" makes won't fit in the Mazda bung/injector hole -
hole too small.  So depending on which injectors you intend to use you need
to match it with the appropriate bung.

Ed Anderson

I am looking for some for the Mazda injectors myself. Anybody out
there with an NC lathe that can make a hundread please let me hear
from you with a price. 6061 T6 so they can be welded.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org