Perry Casson wrote:

Anybody got an injector handy they can measure
and make a sketch of? I am not at the hangar.

Paul Lamar

 The guess you'll also want to know the base seal fits into a 16.45 - 16.50
 mm hole (measured the primary inj. holes as best I could) and the seal is
 5.5 mm thick.

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org