Ernesto brought over his HKS manifold and TO4 turbo
today
and we tried it on the Kis. Looks like it is going
to work.
Minor change in upper tube mount on the firewall to
gain
a bit more clearance. It looks like the mounting
point
on the firewall needs to go out two inches and
perhaps down
two inches.
I'll be working on some drawings for his Cozy
installation.
That HKS manifold is a bit big but it is not all
that heavy
at around 12 pounds. Nice piece of work. The waste
gate however
is five pounds alone. Another nail in the waste gate
coffin.
Paul Lamar
Paul, I'm getting ready to do my water pump and
wondering what the radiator cap flange and welded on
tube is from. Thanks Jim coffman
That is a real long story. I modified the pump to fit under
the stock Kis cruiser cowling. The flange and pressure cap
fitting were removed from the part I cut off the pump.
Perhaps these picture will go a long way toward explaining
why I did.
Paul Lamar
Hi Paul and group,
Do you want an aluminium water pump, the race guys here have them on the self.
I am at the same stage of mods to the cooling system.
Regards Don
In the states all 13Bs had aluminum pumps. The cartridge and impeller are cast
iron however. The 12As were all cast iron as I recall.
BTW my ETA in Perth is about the 15th or 16th of May. I'll call when I get
in.
Another pic of my modified pump.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org