| Subject: Ernesto's turbo Cozy motor mount. |
| From: ACRE NL |
| Date: 5/5/2002, 8:21 PM |
snips..Here is the latest. Check the dimensions. Now we need some details of the firewall in the upper mount area and details of the spar web so we can draw some mm attach fittings. Paul Lamar
Attached are more details. Can the side braces be removable formaintenance as shown on the modified gif?ErnestoAbsolutely. Paul Lamar
Hi Paul, Your diagram is for the most part correct. Here are the most accurate dimensions I could get: W.L. 34.1, top of firewall W.L. 23.5, B.L. 16.5, top stock engine mount to firewall holes, left and right W.L. 22, top of spar W.L. 21, Crank shaft, C/L of motor W.L. 20.25, B.L. 36.5 inside wing mount bolt holes, 0.5", right and left W.L. 17, trailing edge of wing. W.L. 13.6, bottom of spar W.L. 12.25, B.L.17, .75" control tubes, right and left W.L. 9.65, B.L.17.05, rudder cables, right and left W.L. 7.0, B.L.14.6, stock bottom engine mount holes, right and left W.L 6.0, B.L. 13.0, main gear bolts, right and left W.L. 3.4, Bottom of firewall Firewall to prop face needs to be 41" Thrust line is 1.5 degrees up from C/L of motor Spar is flat .25" behind the fire wall until about B.L. 34 then sweeps aft about 10 degrees 2" before the wing mount holes. For the front MM, could I use the same thing you are using? I would like to mount my intercooler and oil cooler flat in the wing like Greg and Perry are doing. It's fun to see it on paper. Thanks for all your help, ErnestoYes almost any front mount will work. Here is a pic of mine. I intend using the straddle mount bosses on the custom Al oil pan instead of merely bolting it to the front cover as shown here. Place the top bracket as high on the firewall as you can if you use this scheme. This link is mostly in tension so length is no problem. As I mentioned before the thrust line angle can be adjusted for max top speed. Start with the Cozy spec. and make small changes. Your welcome Ernesto. Make the dimension changes where ever necessary. Paul Lamar
Paul what kind of aircraft are you building. For some reason hadn't thought to ask before., Royce
I have a four place Kis Cruiser. Stock turbo 13B. Paul Lamar The AirCraft Rotary Engine NewsLetter. Powered by Linux. ACRE NL web site. Copyright 1998-2002 All world wide rights reserved. http://home.earthlink.net/~rotaryeng/ http://www.linux.org