Subject: Front oil seal worked loose.
From: ACRE NL
Date: 5/5/2002, 8:06 PM


I do not know what's wrong with my Outlook, I cannot enter a subject,
maybe you can add one for me.

I am not surprised :-)

I found my oil leak. It was on the front cover. The eccentric shaft
front cover oil seal worked loose out of the cover and was riding up
against the e-shaft pulley. I should have noticed the small amount of
rubber dust before but I assumed it was from the alternator belt. Has
anyone ever heard of this happening before? The seal is so simple to
install I don?t know how I could have screwed that up. Maybe caused by
harmonics from the pulley driving the alternator?

Chuck Dunlap


Its a new one on me
Chuck. Real strange. I know of no way of locking
it in. Perhaps a real thin sheet metal washer with small machine screws
safety wired somehow.

Paul Lamar

I don't know if this applies to the rotary, but with piston
engines, front & rear seal problems are usually related to
the main bearings being too loose.

Charlie England

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org