Subject: E-shaft oil jets
From: ACRE NL
Date: 5/7/2002, 8:03 AM


Mazdatrix has the jets, I don't have the part # because I'm at work, but Tracy's book has the part number in it. I don't know how bad you bunged up the e-shaft jets, but you might want to run a tap and die over the threads if you can find the right size tap and die. Then re- install them with Locktite or even JB weld if you're sure you'll never have to remove them again.
Brian Trubee

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org