snips..
Perry's absolutely right.
You CAN build an experimental plane from
certified PARTS. I know someone
who used a Cardinal fuselage and
tail/stabilator, made a new interior,
instrument panel, made his own new carbon
fiber wings (of course better
than stock), and his own engine installation.
All his work came to over
51% of the total aircraft. He had the FAA GADO
rep sign off on his plans
BEFORE he started to make sure. No problem
they said, 51% is the guiding
principle. So there it is. The certified
airframe parts became
experimental when he modified them for his
uses.
Marc Wiese
Thanks Mark
That helps a lot.,
Royce
The 51% rule applies to the builder qualifying for a
builders repairman certificate. So he/she can do mods
and annuals on an experimental.
Using production parts is a sticky subject to qualify
for experimental, for the FAA and the DAR's. Some
regions accept wings, tail sections some don't.
Good example of regional politics: A guy bought a 2
place Pietnpole in a state north of the Ohio River
that was inspected and licensed experimental. The
Louisville (Southeast Region) FAA grounded the plane
at annual because the struts were not welded to their
standards. Supposely the struts were from a 2 place
Piper product. The airplane wasted away. It seems
when one district grounds an airplane no one else will
touch it. Sad but true. This isn't hearsay it happened
in the late 80s, at the airport I teach from. I sure
hope the FAA's pilot friendly program is still going.
JB
PS:If anyone is looking for a great airplane to fill
in the builder's gap I have a super Grumman AA1A 160
hp (Lycoming) for sale.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org