Subject: Experimental category for Cert parts
From: ACRE NL
Date: 5/7/2002, 4:59 PM


Supposedly you can build your own experimental using parts of
certified aircraft, like wings from a Mooney and fuselage from a
Cessna, or something like that.  But the 51% rule probably
applies.  Just changing out an engine on a certified plane would
not be 51%.

--
Perry Mick
Duckt N7XR
http://www.ductedfan.com


Perry's absolutely right.
You CAN build an experimental plane from certified PARTS. I know someone
who used a Cardinal fuselage and tail/stabilator, made a new interior,
instrument panel, made his own new carbon fiber wings (of course better
than stock), and his own engine installation. All his work came to over
51% of the total aircraft. He had the FAA GADO rep sign off on his plans
BEFORE he started to make sure. No problem they said, 51% is the guiding
principle. So there it is. The certified airframe parts became
experimental when he modified them for his uses.
Marc Wiese

Thanks Mark
That helps a lot.,
Royce

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org