Subject: New York Times takes notice of Rotary Return
From: ACRE NL
Date: 5/7/2002, 4:35 PM


New York Times takes notice of Rotary Return
     Source: New York Times
     03/29/2002
     DETROIT -- When it goes on sale early next year, the Mazda RX-8 will
bring the Wankel rotary engine back to America. The last rotary-powered
model sold here was
     also a Mazda, the RX-7, which was last imported in 1995. Rotary
engines remain a mechanical oddity in an industry that worships
standardization and volume.

     In the 1960's and 1970's, the rotary engine was viewed, for a time,
as the next step in automotive evolution. It came closer to anything yet in
displacing the industry's
     established technology. At the peak of rotary enthusiasm, companies
produced rotary-powered motorcycles, outboard boat motors, airplane engines
and even lawn mowers.
     General Motors and American Motors both had plans to use rotary
engines in production models - plans never realized.

     The engine's appeal lay in its elegant simplicity. The Wankel rotary,
also known as the Wankel - after its German inventor, Felix Wankel - has
only a handful of parts,
     compared with about 40 pieces in a four-cylinder piston engine.

     Its central rotor, a triangular piece of metal that revolves in a
chamber, does the work of multiple reciprocating pistons. In the four-stroke
cycle of a piston engine, valves
     move up and down to bring air in and extract gases out. But the rotor
of a Wankel engine allows the four-stroke process to occur simultaneously.
As the rotor turns, it
     uncovers slots in the housing, admitting air and then letting exhaust
out. As a consequence, the rotary engine is lighter and more powerful for
its size than even the latest
     high-compression V-8's.

     The rotary's main benefit was to take the same combustion process
that works so well in a conventional engine and arrange it in a far more
compact design. The rotary
     produces twice the power of a conventional engine of similar size.
The rotary motion and the timing of the power pulses run with uncanny
smoothness.
     Today, with billions of dollars committed to research on electric
cars, fuel cells and other futuristic technologies, the rotary engine offers
a cautionary tale of how a can't-miss
     technology can fail to live up to expectations. Displacing
established technology is never easy, but the Wankel came closer than
anything else in the auto industry. By the late
     1950's, when a German manufacturer, NSU, first took interest in the
rotary engine, there were already more piston engines in the United States
than flush toilets.
     The Wankel was introduced at an auspicious time. Eisenhower was
president and tail fins were still growing taller every year. In the air,
jet engines were displacing piston
     engines. Motorists had a seemingly unquenchable thirst for power.
NSU's introduction in 1961 of the Prinz, the first production car to use the
Wankel engine, captured the
     imagination of auto engineers worldwide, even though the car proved
unreliable.

     NSU built one more car with rotary power, the Ro80 sedan, before
being folded into the fledgling Audi group in the late 1960's. By then,
rotary development was under way
     on three continents under Wankel licenses.

     The president of General Motors, Edward N. Cole, saw the Wankel
design as delivering some of the benefits of gas turbine engines, which were
a continuing research
     program at the company, in a relatively low-cost design. In Japan,
Kenichi Yamamoto, president of Toyo Kogyo, which later became Mazda, also
saw the rotary's potential
     and introduced it into several models, including the Cosmo Sport,
sold in the United States as the 110 S. In 1969, Mercedes began
experimenting with a series of C-111 sports
     car prototypes that could reach 180 m.p.h. with four-rotor engines;
those cars were never brought to production.
     But the oil crisis of the early 1970's brought rotary-engine
development to a near standstill. The rotary had two serious drawbacks:
relatively high emissions and poor fuel
     economy. When Mr. Cole retired, G.M. canceled its production plans.
     Among automakers, only Mazda persevered. The company's engineers
improved the fuel economy, reliability and emission performance, and went on
to develop a series of
     sedans and sports cars with rotary engines, winning races at Le Mans
and gaining a loyal following. The new RX-8 rotary produces as much power as
its predecessor
     without the use of turbochargers.
     Recent research shows the shape of the combustion chamber in a rotary
engine is well suited to using pure hydrogen as a fuel. Hydrogen is
particularly clean, ending up
     mainly as water when burned. Mazda has been working for several years
on the potential of a hydrogen-fueled rotary engine.


I have an interesting question - about how many of you on this list are bona
fide
potential customers for an RX8? - you do not have to aswer this - just think
about it. Vance

Count me in.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org