Subject: The first rotary engine powered aircraft
From: ACRE NL
Date: 5/7/2002, 4:41 PM

"Greco, Bob" wrote:

The first rotary powered airplane was a 1968 Cessna Cardinal.  It used the same
Curtis-Wright RC2-60 Wankle engine that was later used in the Q-Star powered
sailplane prototype.  The work was done under contract by Cessna Aircraft in Wichita.
The installation was done in two phases.  Both phases used a belt driven reduction
system but had different reduction ratios.  Almost the entire tailcone was converted into
a muffler and the exhaust exited in a vertical direction above the horizontal tail.  The
propeller was 10 ft in Dia. and turned at 800 rpm in one of the phases.  This large
diameter prop required an extended nose gear for the aircraft.  Len Ikerd was the
Cessna test pilot for the program.  This aircraft was so quiet that you couldn't hear it fly
overhead.  The entire propulsion package was later removed from the Cardinal and sent
to Lockheed for the Q-Star prototype

Cessna also had one of the first Mazda rotaries as part of an alternative engine study
program which was ongoing in the late 60s.

I worked there during these programs as an Engineer in the Propulsion Group.

Bob Greco
Powerplant Systems Integration
Phone: 602-231-7239
Fax: 602-231-3918

I see your still a rotary fan. Once people have been exposed they are
enthusiast for life. 

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org