Tom Webber wrote:

Ok,  This is my first message and question.  I

hope somebody out there can assist in my project.

I'm building a light experimental aircraft,

"Corby Starlet" Single place mostly wood aircraft.
Designed by John Corby in the 60's.

Anyway the plans call out for the V.W. engine.

with a weight of 140 to 150 lbs. @ 45 to 60 hp. well
I want to use a single rotor Mazda variant.

I've seen a picture of one but have failed to find

any technical information on how to go about this.
Does anyone know where to obtain a single rotor
E-shaft?

Any information will help.   Thanks in advance.

T.W.

Royce is working on it. Royce?

Paul Lamar

Francois St-Germain wrote:

Hi Tom If you do not find a One rotor E-Shaft.
I can help you to modify your 2 rotors E-Shaft.
I have made my own single rotor engine and it works
good.
It is not finished but the engine is rebuilt and it
runs smooth.
I send you a picture of the engine.

Frank

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org