Tom Kendall posted:

I just ran upstairs and checked my pulleys.  No marks.  But the e-shaft
pulley is bolted to a flange that is keyed to the e-shaft, and that

flange

has symmetric bolt holes.  So any mark on the pulley could be

mis-assembled

to give a bad indication.  Don't bother looking there.

Look Carefully.  That pulley will only go on one way.  The holes are not
exactly symetrical.  At least this is the case on my 20B and every 13B ever
made.

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org