Vance W Jaqua wrote:

Paul and others - has Powersports gone under? Can't seem to get a web page
and do not see any ads in magazines lately.

snips...

 Hello Vance, and others on the list,

Powersport Aviation is most definitely alive and well!  We had a successful
show at the Minnesota Wing RV Forum this past weekend, and are now battling
poor weather again. Our RV-6A has been updated, 8 engines have shipped, and
3 additional engine orders have been received.  We were disappointed to miss
all those who attended Sun-N-Fun, but look forward to seeing people at Air
venture this summer.

We have in the past had trouble with our ISP, but not recently as far as we
know.  The web site address remains the same and has been recently updated
with content, pictures, and a video which looks and sounds great, but does
not work on all systems.  We can be reached at www.powersportaviation.com ,
or I may be contacted directly at the numbers below.

It has come to our attention that there may be some confusion over the
pricing of our 215Hp engine, and complete installation packages.  This
misunderstanding may have come from the way component prices are listed on
the web site, as some components are not available individually.  The 215HP
engine with reduction drive sells for $22,500, and includes the starter,
alternator and complete electrical harness featuring dual FADEC ECU's. All
engines are run in and have performance verified before shipping. The FWF
installation packages take the engineering and trial and error out of
mounting the engine and include: engine mount frame, Aluminum engine mounts,
Certified Barry Controls vibration isolators, oil and water coolers, exhaust
system, and custom cowling. The installation packages vary slightly in cost
between airframes, but average $6,000.00

Keith are you saying that the engine assembly costs $22, 500.00 and an additional
$6, 000.00 for the installation kit? That gives you a total price of $28, 500.00.
Add a prop and you would be approaching $30,000.00.
Does this engine have aluminum side housings, and pulleys?
Royce

  Hope that this helps.
Best Always,

Keith Holm
Manager
Powersport Aviation
531 Simmon Dr
Osceola WI 54020
P 715-294-2557  F 715-294-3151

keith@powersportaviation.com

www.powersportaviation.com

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org