Hi guys,
Here we are at Don's house in Perth.
Went to see Don's shop yesterday and today we will meet Ian at noon and see
his rotary powered RV6 at the Bindoon air strip. I'll bring my db meter
Ian and take some muffler noise data. No time to take cooling system
air pressure data :-)

 We will all get together on Thurs at 7 PM at theBrass Monkey
in North Bridge on Williams Street. All are invited. We had planned on that
today Wed but not possible as Bin doon is too far north. All near Perth are
invited.

BTW Here is a picture of Don's carbon fiber turtle deck for his Mustang II.
Eat your heart out Mustang builders. Don has the mold for this part, the
carbon
fiber doors and the plexi windows that go in them. Don also has the mold for
a
larger Cozy fuselage.

The light weight third gen water pump will fit the second gen engine with a
bit of
material milled of the back of the pump. This means you are going to have
to put out big bucks for a complete 3 rd gen water pump.

Paul Lamar