Subject: Single Rotor 13B gear box.
From: ACRE NL
Date: 6/20/2002, 6:46 AM


Based on a month old message.

david mccandless wrote:

Does anyone know of a small redrive unit that can handle about
120-150hp, or plans on how to build one. Not you Don D, I'll see you
tues or wed. Here's hoping, Dave McC

Check the ACRE NL web site. The trick is to use a Ford C6 planetary.
The housing can be made from thick wall telescopic alloy tubing.

Paul Lamar

Paul,

I see oil seals but after a very quick look I wonder about a lube source and
return. What am I missing ?

Fred O.

Don has not decided on oiling yet to my knowledge.
Here are some pictures of Don's home made Ford planetary gear box I took while
in Perth about three weeks ago. The housing is MIG welded up from thick wall aluminum
tubing.

The gears and rubber coupling themselves are located inside the
stock Mazda bell housing to keep the over all length down to 14 inches. Same as Ross
and Tracy Crook's. Clever idea Don.  I'll have a drawing shortly.

Paul Lamar

Here is a drawing of Don's gear box.

Paul Lamar

Light weight at 45 pounds? Sounds like Ross's and Tracy's.

Finn

The bell housing is a very light weight die casting. The rest is a bit conservatively
designed and IMHO the wall thickness could be reduced. Also the input and output shafts 
could be drilled out to save some more weight.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org