Based on a month old message.
david mccandless wrote:
Does anyone know of a small redrive unit that can handle about
120-150hp, or plans on how to build one. Not you Don D, I'll see you
tues or wed. Here's hoping, Dave McC
Check the ACRE NL web site. The trick is to use a Ford C6 planetary.
The housing can be made from thick wall telescopic alloy tubing.
Paul Lamar
Paul,
I see oil seals but after a very quick look I wonder about a lube source and
return. What am I missing ?
Fred O.
Don has not decided on oiling yet to my knowledge.
Here are some pictures of Don's home made Ford planetary gear box I took while
in Perth about three weeks ago. The housing is MIG welded up from thick wall aluminum
tubing.
The gears and rubber coupling themselves are located inside the
stock Mazda bell housing to keep the over all length down to 14 inches. Same as Ross
and Tracy Crook's. Clever idea Don. I'll have a drawing shortly.
Paul Lamar
Here is a drawing of Don's gear box.
Paul Lamar
Here are a few more pictures of this simple and ingenious gear box.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org