Ken Welter wrote:
Welcome back Paul and I must say that the photos you sent were
fabulous and gives a different view that you do not see of Australia,
like from a pilots view.
Now on to old news but you may not have heard of it on that side of
the pond, the old coot went up in smoke, it started from what I
believe to be a sunk float as I had just changed the needle and seat
to try and fix a very rich mixture problem and when I tried to start
it when I had a carb backfire that started the fire.
I was going to start building my new four place coot this summer but
it has been put into high gear now as I have more time on my hands as
I am not flying this summer. I have cut and stretched the mold 24
inches and have a new hull in the mold and should have it out in a
day or two and will shoot you a photo of it when its out. The wings,
tail feathers and redrive are salvageable and I pulled the engine
down and it is in good shape except for the external goodies. I will
keep in touch.
Ken Welter
I was real sorry to hear about your fire Ken. I takes so much work to get
these rotary powered airplanes flying. When one crashes or is destroyed
some how it is a real tragedy.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org