Subject: a good pitch motor
From: ACRE NL
Date: 6/20/2002, 5:43 PM

Vance W Jaqua wrote:

Paul - and others on the prop program.
I think I have found a near ideal pitch motor for your prop.
with slower speed and incredible torque, it would invite
a more robust pitch screw with a coarser thread. It
has a brake (rated at 24v but appears to work just fine
on 12v) and a tach sensor (probably not much help in
this application) This is from All Electric in Van Nuys
on Oxnard.

PS I am giving a presentation on the Wankel engine
at chpt 40 in Van Nuys Friday evening , and I will
probably have no worthy opponents
Vance

Are you implying you are going to bad mouth the rotary and/or I am not a worthy opponent? :-)
If so I will sure to be there and demand equal time :-)
What is the address and time?

Paul Lamar

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

MOTOR1.jpg

MOTOR2.jpg