Subject: Single Rotor 13B gear box.
From: ACRE NL
Date: 6/22/2002, 9:31 PM


david mccandless wrote:

 Does anyone know of a small redrive unit that can handle about
 120-150hp, or plans on how to build one. Not you Don D, I'll see you
 tues or wed. Here's hoping, Dave McC

Check the ACRE NL web site. The trick is to use a Ford C6 planetary.
The housing can be made from thick wall telescopic alloy tubing.
Paul Lamar


 Paul,
 I see oil seals but after a very quick look I wonder about a lube source

and

 return. What am I missing ?
 Fred O.

Don has not decided on oiling yet to my knowledge.
Here are some pictures of Don's home made Ford planetary gear box I took

while

in Perth about three weeks ago. The housing is MIG welded up from thick

wall aluminum

tubing.
The gears and rubber coupling themselves are located inside the
stock Mazda bell housing to keep the over all length down to 14 inches.

Same as Ross

and Tracy Crook's. Clever idea Don.  I'll have a drawing shortly.
Paul Lamar

]
Welcome back Paul,
Question for Don Dunbar. What is the source for your PSRU input and output
shafts?
Ed. Sadler


The shafts have been machined from solid billet.
Don Dunbar

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org