Subject: a good pitch motor
From: ACRE NL
Date: 6/22/2002, 12:37 AM


Vance W Jaqua wrote:


Paul - and others on the prop program.
I think I have found a near ideal pitch motor for your prop.
with slower speed and incredible torque, it would invite
a more robust pitch screw with a coarser thread. It
has a brake (rated at 24v but appears to work just fine
on 12v) and a tach sensor (probably not much help in
this application) This is from All Electric in Van Nuys
on Oxnard.

PS I am giving a presentation on the Wankel engine
at chpt 40 in Van Nuys Friday evening , and I will
probably have no worthy opponents
Vance



Are you implying you are going to bad mouth the rotary and/or I am not a
worthy opponent? :-)


If so I will sure to be there and demand equal time :-)
What is the address and time?

Paul Lamar


Well, no, I am not going to badmouth the rotary, nor sugar coat it, and I
chose to
"rattle your cage" because you are a worthy adversary. I do intend to
convert
those not in the "choir" that my view of displacement is correct, and to
describe in greater than usual detail, how the power actually gets out of
the Wankel. In your absence, probably Murry Rozanski will be the only
"gearhead" in a position to assess my claims.

The meeting starts at 8 pm at the Congregational Church of Northridge on
the corner of Balboa and Superior. The meeting is in the back - you turn
west on Superior, and left into the back parking lot, just past a stop sign.
If you happen to have any Mazda parts in your trunk, that would be
a big hit. I have numerous charts, and intend to be fair, but critical.
The Mazda is a great engine, but as all other engineering marvels
has it's warts and moles.
Vance


Ok Vance see you there. Thanks for the directions.

Paul Lamar


Paul, let me know how this turns out. :-)
Royce

Actually it turned out very well indeed. See the previous message.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org