Mike Collier wrote:
Is there any difference internally between a NA and a Turbo 13B other than different rotors? I guess what I'm asking is can I take a NA engine and turn it into a turbo by changing the rotors or does it require a lot more work than that?
Mike C.
Some late turbo's had milling modifications to the rotor housing water jacket
around the spark plug bosses to enhance the heat transfer to the coolant.
You can take an NA and turn it into a turbo without changing the rotors if
you flat rate it. In other words
only use the boost at high altitude to bring the HP back up to sea level values.
Actually 2 or 3 psi boost probably won't hurt at sea level.
Still use an intercooler however as you will need it at altitude when boosting
as much 5 to 8 psi. That will reduce the charge air temp and reduce the possibility
of detonation. Adjusting and limiting the manifold pressure with the throttle seems
to be working well for the only rotary turbo flying right at the moment. No waste
gate is used. Just a pop off valve on the intake manifold.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org