Mike Collier wrote:
Is there any difference internally between a NA and a Turbo 13B other than
different rotors? I guess what I'm asking is can I take a NA engine and turn
it into a turbo by changing the rotors or does it require a lot more work
than that?
Mike C.
The turbo rotor housing exhaust ports don't have splitters, only 4 intake
ports vs the 6 of the NA, 89 and later turbos have 9:1 lightweight rotors
(same weight as the 89+ NA rotors), the 86-88 rotors are 8.5:1. 93+ turbo
engines (13B-REW) also had hardened gears, and stronger side housings.
There is a link on the ACRE site called "Excellent dessertation on the
differences of various models of Mazda turbo rotaries" here it is:
http://my.engr.ucdavis.edu/~pko/13BTvs13BREW.html
Mazda Motorsport or Bruce Turrentine are good sources for new parts, all the
86+ RX-7's in japan were turbos (no NA models), so the used japanese imports
are all turbo, frequently the "side" housings (front, rear, and middle
housings) on the used ones are well within spec.
To answer your question you can easily turbocharge an NA engine, but why?
I would always use new rotor housings for a HD application like an aircraft.
Hans Conser
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org