Subject: Engine name and one rotor balance
From: ACRE NL
Date: 6/25/2002, 12:16 PM


Paul's had it all along: ACRE (Aircraft Rotary
Engine)

--
Perry Mick

*********************************************************

RIGHT ON, Perry!!!

I was going to suggest the exact same thing "ACRE 13B"
but I held back, knowing that Paul wouldn't allow it
since he's inflicted with the decease known
as "SUEDCONSCIOUSITIS" :)

I would just call it what it is, since we have nothing
to hide........AC-13B (Aircraft-13B) or EXP-13B
There's no need to camouflage our sincere, open, HONEST
and generous efforts for the likes of our incompetent
biurocratic "NTSB" (Not Too Swift Bastards).............
SCREW THOSE BLOOMING IDIOTS.

Bulllllent!!!,.............look what you've done,
"You've aroused the Militant Indian in me" :)

                                 I digress,
                                    Butch

-david mccandless wrote:

Hi Paul, I think that last suggestion,ACRE13B is probably the best so
far. Didn't Mazda refer to some of their models years ago as RE 12 etc?
That disease sure sounds painful. What is biurocratic? Anyway, right now
I'm trying to get my head around the single rotor balance problem. Are
the balance weights there to balance the rotors, or are they there to
balance the ecentric journals on the E shaft; or both?
Dave McC- 

I think Butch meant  "bureaucratic".

Both the rotor and eccentric journal. If you set the cut down e shaft
and rotor with the balance weights  on two horizontal knife edges and 
it does not rotated  that should be sufficient static balance.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

balance-diagram.jpg